Description

PP Core Spun Filter Cartridge 30 inch

Kami adalah importir distributor agen dan supplier PP Core Spun Filter Cartridge 30 inch terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas dan harga terbaik.

POLY-SPUN depth filter cartridges are individually packaged to provide from 1 to 75 micron (µm) high purity filtration and an organic free, pure PP media. Their outstanding chemical resistance, fiber free melt-bonded media and excellent flow characteristics present a filter cartridge that meets the tough requirements of today’s technology.

Overview PP Core Meltblown Filter Cartridge

PFI ADSMF and PP Series Melt Blown Filter Elements with Cores are manufactured of polypropylene complying with FDA, free of binder, surfactant and adhesive, accompanied by broad chemical compatibility. PP melt blown filter elements are robust and each high-efficiency polypropylene melt blown depth filter has an internal polypropylene core for added strength. Melt blown filter elements utilize a multi-layered construction for progressive contaminant removal efficiency and longer filter life. PFI Filtration innovatively creates PP water filter elements with superior performance and consistency, which are widely used in RO pre-filtration, microelectronics, food & beverage and process water industries.

PFI Spun Bonded Filter Cartridge are made up of 100% polypropylene fibers. The fibers have been carefully spunned together to form a true gradient density from outer to the inner surface. Filter cartridges are available with both core & without core version. The Filter Cartridge Spun superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on the central molded core, without any binders, resins or lubricants.

Feature and Specification

Dimensions
- Outside Diameter : 60 – 63 mm
- Inner Diameter : 28 mm
- Length : 10 – 50 inch
Material of Construction
- Filter Media : Polypropylene
- End Caps : Polypropylene for SOE type
- Core : Polypropylene
- Gasket/O-Ring : Silicone, EPDM, NBR, Viton
Performance
- Micron Rating : 1 – 100 μm
- Max Differential Temperature : 2.0 Bar @ 69.8°F (21°C)
- Max Operating Temperature : 179°F (82°C)

Feature

- Free of surfactants, binders and adhesives
- Excellent flow with low pressure drop
- High dirt holding capacity
- 100 % Polypropylene for wide chemical compatibility.
- High strength & pressure resistance
- One piece construction up to 1016 mm & more
- Nominal & absolute filtration rating
- Configuration
  - Double Open Type (DOE Type)
  - 226 O’ Ring Design / Bayonet
  - 226 O’ Ring Design / Flat
  - 222 O’ Ring Design / Bayonet
  - 222 O’ Ring Design / Flat