Description
FilmTec SW30HRLE-400 Dry RO Membrane
PT PROFILTER INDONESIA mempersembahkan FilmTec SW30HRLE-400 Dry RO Membrane, membran reverse osmosis (RO) unggulan dari DuPont yang didesain khusus untuk aplikasi desalinasi air laut. Dengan teknologi Thin-Film Composite (TFC), membran ini menjamin kinerja tinggi, efisiensi energi optimal, serta ketahanan terhadap fouling dan korosi. Produk ini sangat cocok untuk sistem RO skala besar, baik di kapal, industri, maupun fasilitas penyediaan air minum yang menuntut kualitas air bersih dan stabil.
Description FilmTec SW30HRLE-400 Dry
Starting in 2020, DuPont Water Solutions has produced and supplied our customers dry seawater reverse osmosis FilmTec™ elements. As an industry leader, we will be the first supplier to offer dry-tested SWRO elements.
- Dry elements do not have expiration date, making easier warehouse maintenance and inventory planning.
- Dry elements do not need re-preservation while wet elements preservation solution needs to be checked after 12 months of storage and eventually replaced. This operation is very labor intensive and can lead to high costs.
- More attractive warranties. The allowable storage time before mandatory start of the warranty has been extended by 6 months.
- Dry elements are lighter (4 kg / 8 pounds less) and do not have a preservation solution, which involves an easier and safer loading and installation.
- Due to the lower weight and the lower energy and water consumed during testing, dry elements are more environmentally friendly compared to wet elements, more specifically dry elements represent a 20% reduction in CO2 emissions compared to wet elements.
FilmTec™ SW30HRLE-400 Elements offer rejection and low total cost of water for seawater desalination. The FilmTec SW30HRLE-400 delivers high performance over the operating lifetime without the use of oxidative post-treatments and provides high NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.
Spesifikasi FilmTec SW30HRLE-400
- Hard fiberglass outer shell
- Diameter : 8.0″
- Length : 40″
- Applied Pressure : 800PSI
- Nominal Capacity in GPD : 7500
- Maximum Pressure : 1200PSI
- Weight : 40lbs
- Stabilized salt rejection : 99.75%
- Stabilized boron rejection : 91%
- Maximum Operating Temperature : 113F (45C)
- Maxium Feed Flow Rate : 85GPM
- Maxium Pressure Drop : 15PSI
- 400 ft2 of active membrane surface area
Application
- Municipal water treatments
- Commercial water treatment
- Food & Beverage
- Industrial Utility Water
- Industrial Wastewater
- Microelectronics
- Oil and Gas Upstream
- Power Generation
- Residential
Kenapa Harus Beli ke PFI Filtration
- Stock Membrane Filmtec DuPont lengkap di Indonesia
- Produk asli dengan garansi resmi
- Konsultasi teknis dan dukungan instalasi gratis
- Pengiriman cepat ke seluruh Indonesia
- Layanan purna jual profesional dan terpercaya
Untuk informasi lengkap dan permintaan penawaran harga FilmTec SW30HRLE-400 Dry RO Membrane segera hubungi kantor kami.
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01 Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 84937329 , 84937805 , 22962668
Mobile : 081385066789
Email : sales@profilterindonesia.com
